Báo trộm SECO-LARM

SK-910R-4Q

1-Channel RF Receiver, 11~24 VAC/VDC, 433.92MHz, Relay Output

Mua hàng

SK-910RBQ

1-Channel RF Receiver, 11~24 VAC/VDC, 315MHz, Relay Output

Mua hàng
HOT

ENFORCER E-9679-8B190Q

For indoor or outdoor perimeter security

Long sensor range up to 190ft (60m) outdoors, 380ft (120m) indoors

Install on windows, doorways, skylights, fence tops, and any place where space is limited

End caps swivel so sensor can be mounted on a single wall or on opposite walls with no L-bracket needed

Programmable immediate trigger on simultaneous breaking of beams, or trigger after a single pair of beams is broken for at least 2 seconds

Heater for use in cold weather operation

Heater activates at 41ºF (5ºC)

Terminal block wiring

Slim design: 2-1/4" x 1-7/8" (55 x 49 mm)

Rugged aluminum construction

Built-in tamper switches, one on either end, trigger the alarm if end cap is removed

No synchronizing wires required to align the beams

Form C relay output

LED and buzzer alignment indicators

AGC (Auto Gain Control) circuits regulate beam signals in order to compensate for and ensure operation in rain, fog, and low-temperature conditions

Programmable for 4 different frequencies to reduce interference between multiple units

Mua hàng
HOT

ENFORCER E-9643-4B190Q

For indoor or outdoor perimeter security

Long sensor range up to 190ft (60m) outdoors, 380ft (120m) indoors

Install on windows, doorways, skylights, fence tops, and any place where space is limited

End caps swivel so sensor can be mounted on a single wall or on opposite walls with no L-bracket needed

Programmable immediate trigger on simultaneous breaking of beams, or trigger after a single pair of beams is broken for at least 2 seconds

Heater for use in cold weather operation

Heater activates at 41ºF (5ºC)

Terminal block wiring

Slim design: 2-1/4" x 1-7/8" (55 x 49 mm)

Rugged aluminum construction

Built-in tamper switches, one on either end, trigger the alarm if end cap is removed

No synchronizing wires required to align the beams

Form C relay output

LED and buzzer alignment indicators

AGC (Auto Gain Control) circuits regulate beam signals in order to compensate for and ensure operation in rain, fog, and low-temperature conditions

Programmable for 4 different frequencies to reduce interference between multiple units

Mua hàng
HOT

ENFORCER E-9680-10B25

Rugged aluminum construction

LED alignment indicator

No synchronizing wires required

NO/NC relay output

Weatherproof IP65 construction

Slimline design (7/8" x 1-5/16" cross section)

Trigger by simultaneously breaking 2 adjacent beams or any single beam (programmable)

For windows, doorways, etc., where space is limited

L-brackets and mounting hardware included

3 Programmable frequencies eliminate interference
when installing multiple sensors in close proximity

Mua hàng
HOT

ENFORCER E-9660-8B25

Rugged aluminum construction

LED alignment indicator

No synchronizing wires required

NO/NC relay output

Weatherproof IP65 construction

Slimline design (7/8" x 1-5/16" cross section)

Trigger by simultaneously breaking 2 adjacent beams or any single beam (programmable)

For windows, doorways, etc., where space is limited

L-brackets and mounting hardware included

3 Programmable frequencies eliminate interference
when installing multiple sensors in close proximity

Mua hàng
HOT

IR Curtain Sensors for Indoor/Outdoor Access Control

Rugged aluminum construction

LED alignment indicator

No synchronizing wires required

NO/NC relay output

Weatherproof IP65 construction

Slimline design (7/8" x 1-5/16" cross section)

Trigger by simultaneously breaking 2 adjacent beams or any single beam (programmable)

For windows, doorways, etc., where space is limited

L-brackets and mounting hardware included

3 Programmable frequencies eliminate interference
when installing multiple sensors in close proximity

Mua hàng
HOT

IR Curtain Sensors for Indoor/Outdoor Access Control, 25ft

Rugged aluminum construction

LED alignment indicator

No synchronizing wires required

NO/NC relay output

Weatherproof IP65 construction

Slimline design (7/8" x 1-5/16" cross section)

Trigger by simultaneously breaking 2 adjacent beams or any single beam (programmable)

For windows, doorways, etc., where space is limited

L-brackets and mounting hardware included

Multi-Frequency: Reduces interference and eliminates crosstalk when multiple units are used in close proximity to one another

Mua hàng
HOT

Reflective Photoelectric Beam Sensor, ETL UL325 Compliant, 50ft

  • For outdoor gates, garage doors, etc.
  • Weatherproof (IP55) construction for indoor/outdoor use
  • Anti-condensation housing
  • Dual-color LED alignment system
  • Form C relay: 500mA@30VAC/VDC
  • Tamper switch: N.C. 500mA@30VAC/VDC
  • 31/4” (82mm) Round reflector with hood included
  • Compact size
  • Monitored output: N.C., 10kΩ Resistor
Mua hàng