Đầu báo Gas tại chỗ GST C-9602LW
- C-9602LW Conventional Gas Detector (the detector) is wall-mounted, designed to check and monitor liquefied petroleum gas (LPG) of leakage in such applications as houses, hotels and apartments.
Thông số kỹ thuật
- Operating Voltage: 187VAC~253VAC.
- Power Consumption: Standby State≤3.0W/ Alarm State≤5.0W.
- Output capacity and control mode:
+ Voltage contact: For 12VDC one-way pulse solenoid, whose driving capability is 1000μF capacitance discharge.
+ Volt-free contact: Volt-free normally open contact, its capacity is 220V/1A used for controlling connected devices.
- Alarm Set Point: Liquefied Petroleum Gas: 2200×10-6 (10%LEL)
- Indicator:
+ Power LED: Green, flashes in warm-up state and then constantly lights.
+ Alarm/ Fault LED: Dual color. It’s red when the detector goes into alarm, and yellow into fault.
- Buzzer: It sounds twice every second in alarming, and once every three seconds in fault.
- Self Test: Pressing Self-Test, the LEDs will flash in turn with the buzzer sounding three times.
- Life of Sensor: 5 years.
- Operating Environment:
+ Temperature: -10℃~ +50℃
+ Relative Humidity≤95%, non condensing
- Dimension: 121 × 87 × 47 mm.
- Ingress Protection Rating: IP30.
- Material and Color of Enclosure: ABS, ivory white.
- Weight: 320g.
- Mounting Hole Distance: 23mm.
