Photoelectric Twin Beam Sensor Outdoor/Indoor TAKEX PB-30TK(K)

Photoelectric Twin Beam Sensor Outdoor/Indoor TAKEX PB-30TK(K)

  • MS 0015234
  • TAKEX
Giá : 2,821,000 vnđ (Đã bao gồm VAT)

Photoelectric Twin Beam Sensor Outdoor/Indoor TAKEX PB-30TK(K)

Photoelectric Twin Beam Sensor Outdoor/Indoor TAKEX PB-30TK(K)

- High Reliability

   + Synchronized twin beams reduce false alarms caused by flying birds and falling leaves.

- External Light Protection

   + Trouble-free condition in 50,000 lx illumination fluctuation is assured by external light compensation circuit a filter, specially designed, that cuts visible rays effectively. Excellent tolerance against sun light, automobile head light, fluorescent light or mercury light.

- Easy Beam Alignment

   + The special view finder allows for fast aiming and assures good alignment. Equipped with monitor jack to check sensitivity.

- Rotary Optical System

   + The optical system of both the transmitter and receiver can be rotated a full 180 degree which allows for side aiming.

   + Therefore the units do not have to be mounted face to face and the beam direction can not be discerned by simple observation.

- Insect Protection

   + A sealed optical system prevents intrusion and interference by insects.

- Other Features

   + Automatic Gain Control circuit loaded

   + Wide adjustment (horizontally +/-90 degrees,vertically +/-10 degrees)

   + Two different colors housing (Black/White)

- Protection Against Frost/Dew

   + As a special hood is attached on sensor cover, beam protection continues without interruption even when the cover is screened by frost or dew.

Thông số kỹ thuật

ModelPB-30TK(K)
Product namePHOTO ELECTRIC BEAM SENSOR
Detection systemSimultaneous breaking, of 2 beams
Infrared beamLED pulsed beam, Double modulation
Protection distanceOutdoor 100' (30m) or less
Indoor 200' (60m) or less
Max. beam rangeOutdoor 1000' (300m) or less
(Approximation)Indoor 1000' (300m) or less
Response time50msec. to 700msec. (Variable at pot)
Supply voltage10V to 30VDC (Non-polarity)
Current consumption53mA or less
Alarm outputDry contact reray output form C
Contact action: Interruption time + delay time (1 to 3 sec.)
Contact capacity: 30V AC/DC, 0.5A or less
Tamper outputDry contact reray N/C
Action: Activated when cover is detached
Contact capacity: 30V AC/DC, 0.5A or less
Alarm LEDRed LED (Receiver)
ON: when an alarm is initiated.
Attenuation LEDRed LED (Receiver)
ON: when an alarm is initiated.
FunctionsMonitor jack output,AGC circuit, Frost proof cover
Ambient temperature range-13F to +140F (-25C to +60C)
Mounting positionsIndoor / Outdoor
WiringTerminals
WeightTransmitter: 13.3oz(380g) Receiver: 14oz(400g)
AppearancePC resin(wine red)

- Xuất xứ: Nhật Bản.

- Bảo hành: 18 tháng.

Bình luận