8-port UTP 10/100/1000Mbps Layer 2 Lite EasySmart Switches PoE D-Link DGS-1100-08PD/E

8-port UTP 10/100/1000Mbps Layer 2 Lite EasySmart Switches PoE D-Link DGS-1100-08PD/E

  • MS 000013488
  • D-Link
Giá : 2,868,000 vnđ (Đã bao gồm VAT)

8-port UTP 10/100/1000Mbps Layer 2 Lite EasySmart Switches PoE D-Link DGS-1100-08PD/E

8-port UTP 10/100/1000Mbps Layer 2 Lite EasySmart Gigabit Switches PoE D-Link DGS-1100-08PD/E

-Either Powered Up via External EU 2-round pin Power Adapter or Powered Up via 802.3af PoE PD Port 1, (H/W : B1, Desktop).

-802.1Q VLAN, Auto Surveillance VLAN, Auto Voice VLAN

-QoS to ensure smooth operation

-Loopback Detection, Broadcast Storm Control to minimize network downtime

-Network Management : SNMP v1/v2c

-D-Link Network Assistant Utility (DNA) for Easy Installation

-Power Saving : IEEE 802.3az Energy Efficient Ethernet, D-Link Green 3.0 power-saving features

-The DGS-1100-08PD/E is a switch designed to meet the requirements of small, medium, and enterprise businesses. 

-Advanced management features, a range of diagnostic and troubleshooting tools, and energy efficient technologies provide a flexible solution to meet your networking requirements.

D-Link Green/Power Saving Performance

-Compliant with IEEE 802.3az Energy Efficient Ethernet (EEE), the DGS-1100-08PD/E consumes less energy by cutting down on power consumption when port utilization is low. 

-By deploying compatible devices, users can cut operating costs and even cut down on additional cooling equipment, helping small and medium-sized businesses stay within their budgets. 

-The DGS-1100-08PD/E also features D-Link Green technology that helps save energy automatically. 

-The switches monitor the link status of every port and significantly reduce power consumption of the interface when there is no link or network traffic detected.

Easy to Deployment

-The DGS-1100-08PD/E supports an intuitive client-based utility (D-Link Network Assistant) and a web-based management interface.

-The client-based D-Link Network Assistant (DNA) discovers all D-Link Smart Managed Switches within the same Layer 2 network segment, making the initial setup quick and easy. 

-This allows extensive switch configuration and basic administration of discovered devices, including password changes and firmware upgrades.

-The web-based interface provides a user-friendly way for network administrators to manage the switch down to the port level.

-The interface can be accessed from a web browser, allowing the switches to be controlled from any PC that is connected to the network.

Surveillance VLAN and Bandwidth Control

-The DGS-1100-08PD/E supports Surveillance VLAN for IP surveillance deployments. 

-This gives video traffic a dedicated VLAN and higher priority through the switch, separating surveillance traffic from the rest of the network. 

-This ensures security and guarantees the quality of the video traffic, sparing businesses the added cost of dedicated surveillance hardware. 

-Bandwidth Control can reserve bandwidth on a per-port basis for important functions that require larger bandwidth or have higher priority.  

Advanced Features 

-The DGS-1100-08PD/E is equipped with advanced security features such as Static MAC, Storm Control, and IGMP Snooping. 

-Static MAC allows users to create a MAC whitelist for specific ports, helping administrators limit network access to authorized devices only. 

-Storm Control monitors broadcast, multicast, or unknown unicast traffic and will start blocking or discarding packets which could flood the network when the defined threshold is exceeded. 

-IGMP Snooping is able to reduce the load of L3 multicast routers and save bandwidth in network throughput. 

Easy Troubleshooting

-The DGS-1100-08PD/E features Loopback Detection and Cable Diagnostics to help network administrators find and solve network problems quickly and easily. 

-Loopback Detection is used to detect loops created by a specific port and automatically shuts down the affected port. 

-Cable Diagnostics helps network administrators quickly examine the quality of the copper cables, recognize the cable type, and detect cable errors.

Technical Specifications

Number of Ports8 10/100/1000 Mbps
Port FunctionsIEEE 802.3 compliant
IEEE 802.3u compliant
IEEE 802.3ab compliance
IEEE 802.3az compliant
Support manual/ auto MDI/ MDIX configuration
Auto-negotiation
Support Half/Full-Duplex operation
IEEE 802.3az compliant
Per-port 6 kV surge protection2
Auto-negotiation
Switching Capacity6 Gbps
Maximum Forwarding Rate11.9 Mpps
MAC Address Table Size8K Entries
Packet Buffer4.1 Mbits
Flash Memory32 Mbyte
Power (per device)Yes
Link/ Activity/ Speed (per port)Yes
Power Input100 to 240 VAC 50 to 60 Hz External Power Adapter
Power Consumption4.89 watts
MTBF648,153 hours
EMIFCC Class A, CE Class A, VCCI Class A, C-Tick
SafetycUL, CE LVD
Dimensions171 x 98 x 27.5 mm
Weight0.45 kg

-Bảo hành: 36 tháng.

Bình luận