Aruba AP-303 (RW) Unified Access Point JZ320A
- Aruba 303 series wireless access points.
- Low-cost 802.11ac Wave 2 (Wifi 5) enterprise connectivity.
Features
- Up to 1.2Gbps aggregate peak data rate
- Daisy-chain another AP using the secondary PoE-out port
- Integrated Zigbee and Bluetooth 5 radio for IoT connectivity
- Resolve sticky client issues with MU-MIMO-aware ClientMatch.
- Participates in Aruba's Dynamic Segmentation solution.
Specifications
- Hardware Variants: Single Ethernet.
- Wifi Radio specifications:
+ AP type: Indoor, dual radio, 5GHz 802.11ac 2x2 MIMO and 2.4GHz 802.11n 2x2 MIMO.
+ 5GHz (radio 0):
+ Two spatial stream Single User (SU) MIMO for up to 867Mbps wireless data rate to individual 2SS VHT80 client devices
+ Two spatial stream Multi User (MU) MIMO for up to 867Mbps wireless data rate to two 1SS MU-MIMO capable client devices simultaneously
+ 2.4GHz (radio 1):
+ Two spatial stream Single User (SU) MIMO for up to 300Mbps wireless data rate to individual 2SS HT40 client devices.
+ Support for up to 256 associated client devices per radio, and up to 16 BSSIDs per radio.
+ Supported frequency bands (country-specific restrictions apply):
+ 2.400 to 2.4835 GHz.
+ 5.150 to 5.250 GHz
+ 5.250 to 5.350 GHz
+ 5.470 to 5.725 GHz
+ 5.725 to 5.850 GHz
- Wifi Antennas
+ Two vertically polarized dual-band downtilt omni-directional antennas for 2x2 MIMO with peak antenna gain of 3.3dBi in 2.4GHz and 5.8dBi in 5GHz
+ The antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees.
- Combining the patterns of both antennas per radio, the peak gain of the average (effective) pattern is 2.1dBi in 2.4GHz and 5.7dBi in 5GHz.
- Other Interfaces
+ E0: One 10/100/1000Base-T Ethernet netwwork interface (RJ-45)
+ Auto-sensing link speed and MDI/MDX
+ 802.3az Energy Efficient Ethernet (EEE)
+ PoE-PD: 48VDC (nominal) 802.3af/at/bt PoE
+ DC power interface
+ E1: One 10/100/1000Base-T Ethernet network interface (RJ-45).
+ Auto-sensing link speed and MDI/MDX.
+ 802.3az Energy Efficient Ethernet (EEE)
+ PoE-PSE (output): 48VDC (nominal) 802.3af/at PoE.
+ Bluetooth Low Energy (BLE) radio.
+ Zigbee 802.15.4 radio.
+ Visual indicators (tri-color LEDs): for System and Radio status.
+ Reset button: factor reset (during device power-up), LED mode control (normal/off).
+ Serial console interface (propriately, µUSB physical jack)
+ Kensington security slot.
- Power Sources and Consumption
+ The AP supports direct DC power and Power over Ethernet (PoE).
+ When both power sources are available, DC power takes priority over PoE.
+ Power sources are sold separately
+ Direct DC source: 12VDC nominal, +/-5%
+ DC power interface accepts 2.1/5.5mm center-positive circular plug with 9.5mm length.
+ Power over Ethernet (PoE): 48VDC (nominal) 802.3af compliant source.
+ Maximum (worst-case) power consumption: 10.1W (PoE) or 8.8W (DC).
+ Maximum (worst-case) power consumption in idle mode: 4.2W (PoE) or 4.0W (DC).
- Dimensions (WxDxH): 150 x 150 x 35 mm.
- Weight: 260g.
- Hàng chính hãng HP.
- Bảo hành: 12 tháng.
