Cảm biến rung chấn động HONEYWELL SC100
- Cảm biến rung chấn động HONEYWELL SC100 dùng cho ATM.
- Tích hợp với hệ tống báo động trung tâm.
Thông số kỹ thuật
| POWER REQUIREMENTS | |
| Supply Voltage | 8 - 16VDC, nominal 12VDC |
| Current Consumption | Typical 3 mA @ 12VDC |
| SENSITIVITY | |
| Adjustable Sensitivity | 4 levels by DIP Switches |
| ATMs/Vault Selection | by DIP switch |
| Reduced Sensitivity Input | For maintenance & Service: Active low (<1.5 VDC) |
| Detection Radius | 16.4’ |
| Alarm Algorithm | Highly sensitive to all known attacks while rejecting known false alarm sources by innovative filters and firmware |
| ALARM OUTPUTS | |
| Solid State Relay (Change Over) | 30VDC/100 mA; Type C |
| Open Collector | Active low during alarm |
| Alarm Hold Time | Approx. 2.5 secs |
| SABOTAGE PROTECTION | |
| Pry-off and Cover Switch | 30 VDC/100 mA |
| Low Supply Voltage Alarm | < 7 VDC |
| Temperature Alarm | 185° F, 23° F, 41° F |
| Internal Functional Alarm | Stainless steel drill shield |
| INPUTS | |
| Remote Test | Active low 1.5 VDC, test duration < 0.5 sec |
| Reduced Sensitivity Input | Active low 1.5 VDC, test duration < 0.5 sec Sensitivity reduction to 12.5 % |
| ENVIRONMENTAL CONDITIONS | |
| Maximum Humidity | 95% RH (non-condensing) |
| Operating Temperature | -40° F – 158° F |
| Storage Temperature | -58° F – 158° F |
| Environmental Class (VdS) | III |
| Housing Protection Category | IP43 |
| HOUSING | |
| Dimensions (H x W x D) | 3.15 x 2.36 x .83 inch |
| Chassis and Cover | Die-cast metal |
| Color | RAL7035 (light gray) |
| Weight | 5 lbs. |
- Bảo hành: 12 tháng.
